Showcase

 

Production of 12-E-01 Test Ring for Heat Exchanger  ( RAW STATE )  for WRPC	Machining  of 12-E-01 Test Ring for Heat Exchanger  ( RAW STATE ) for WRPC
Machining of 12-E-01 Test Ring for Heat Exchanger  ( RAW STATE ) for WRPC	Marking out  of 12-E-01 Test Ring for Heat Exchanger  ( RAW STATE ) for WRPC

FIRST NIGERIAN ATTEMPT -2009

Successfully fabricated the left hand set, high grade chrome alloy quality to replace the imported right hand set of:

High Pressure and low pressure liners for 79KOI KRPC, Kaduna

Hydrogen Compressor for KRPC Turn Around Maintenance (TAM) 2009 (Valued @ 30%  cost of Importation).

 

Successfully fabricated pre-heater burners for WRPC crude lines. Year 2001

 

500kg - 1000kg Capacity  (Ferrous & non-ferrous) Mobile Tilting Furnace, first of its kind ever, designed and fabricated by Engr. Steve Mojugbe for the Nigerian environment.

 

FIRST NIGERIAN ATTEMPT -2011

Successfully fabricated the strainer for WRPC, FCC Compressor 12-K-0

(Imported Cone on the left, Steve Emma Strainer on the right. Specifications immediately below the image)

 

NOMINAL PIPE SIZE “D”	CONE LENGTH “L”		Steve Emma and Associates Product Specification of  Cone Tip Filter/Strainer DIN X5CrNi -189 A1S1 - 304 C= 0.08%, Si 1.00%, Mn = 2.00%, P=0.04%, S=0.03%, Ni=8.00% – 11.00%, Cr=18.00% – 20.00%. Aggregate hole mesh – 9.5mm Asymmetric shape UTS. 520Nmm2, PS = 206Nmm2 13 – 14 inch pipe.
	609
16”	687
18”	761
20”	863
24”	1015
26”	1117
28”	1193
30”	1269
32”	1371
34”	1447
36”	1523
42”	1777

FIRST NIGERIAN ATTEMPT – 2002, 2004 & 2005
Successfully designed, fabricated loader arm drop pipes for Depot  Station PPMC Warri